VT Feet type 30

VT Feet Type 30 is ideal for large volume and heavy weight speakers. These dampning feet effectively isolate the speakers from the floor they are placed on. 

VT Feet Type 30 allows you to hear the sound directly from your sound system without the vibrations generated by the speaker cabinet disturbing the sound quality through the floor construction the speakers are resting on. 

Easy to use. Place 4 pieces of VT Feet Type 30 under each loudspeaker as close to the outer corners of the bottom. Remove the lining to expose the mild adhesive that attaches the VT Feet to the speaker. Make sure no other parts of the speaker protrude further down than the part of the VT Feet attached to the speaker. The VT Feet can be removed again without damaging the cabinet finish.

Note: Never exceed the maximum allowed weight for the VT Feet. For the VT Feet Type 30 this means the loudspeaker must weigh less than 60 kg.

Should you loudspeaker weigh more than 60 kg please use additional VT Feet type 30 to ensure no VT Feet carry more than 15 kg.